How to use Svbony SC001 WiFi spotting scope camera

1. Download and installation

iOS: Enter the app store, search for Svbony Cam, click to download, and install it according to the default steps

Android: Go to Google Store and search for Svbony Cam, click to download, and install it according to the default steps

2. WiFi mode

Setting the external antenna properly on the camera. If the TF card is not installed, install the TF card first. Make your spotting scope and other accessories ready. 

Long press the power button to turn on the device, then enter the installed Svbony Cam APP, click "device not connected" at the top of the main interface of the app to find the WiFi selection list, select SC001_XXXXX, and then type in the default password "12345678” to Connect.

Return to the main interface of the APP, click "Enter Device" to see the image.

Notice:

Before inserting/pulling out the TF card, please keep the camera off.

Please give the APP access to the local album on your phone, the program will automatically create a new album named "Svbony Camera" in your local album to store the images you downloaded from the device.

3. UVC mode

The package of SC001 has a cable included. Just connect the Type-C end to the device, and connect the USB end to the PC. Then open the UVC software on the PC (Amcap software is fine by the way), select UVC CAMERA, and boom, the image is here.

Note: Under the WIFI mode, after switching to UVC mode, the device will automatically default as UVC mode. If you want to return to WIFI mode, you need to pull out the cable and reconnect the device to return to WIFI mode.